Identifying and troubleshooting commercial refrigerators can be challenging. These machines consist of several parts that work together to provide optimum cooling. However, if you have one of those newer models that come with sensors and other types of gadgetry then identifying the problem becomes even more complicated and you need to get commercial refrigerator services for inspection and repair. However, there is no need to worry.

In this blog, we are going to help you troubleshoot some commercial refrigerator problems. Let’s begin!

Power Issue

The first thing you need to check is the power. If your refrigerator is not powering up, then there might be a problem. First, make sure that the power switch is turned off. Then, check the power supply to see if it is plugged in properly. Sometimes, it can get knocked out of place and that does not provide a sufficient amount of power to the refrigerator. Once that is done, check the ground wiring. If the switchboard is providing power but the refrigerator is not turning on, it might be a faulty power supply. Use a voltage detector to detect electricity.

Check The Temperature And Thermostat

If you observe that your refrigerator is not cooling enough, check the temperature and the thermostat. The thermostat is responsible for keeping the interior of the refrigerator cold enough to keep items fresh. If the thermostat feature is faulty, the refrigerator will not produce cool air. In such cases, you will need to call a professional for help. Newer refrigerators and freezers come with all types of complicated technology and playing around with it can further impose damage.

Location Of The Unit

Refrigerators breathe and excrete air. If a refrigerator is installed too close to a wall, it will struggle to breathe and excrete hot air. As a result, the efficiency and performance will drop. Therefore, make sure that there is a slight distance between the refrigerator and the wall. Furthermore, it is suggested that a refrigerator be installed near a window to allow air circulation.

Check The Door Seal

In order to provide optimum cooling, the refrigerator doors need to be sealed properly. If the refrigerator is not maintained, dust and debris will accumulate on the rubber seals, not allowing the door to close properly. Furthermore, if the unit happens to be installed on an unlevel surface, the doors will not seal properly as well. Therefore, make sure there is neither any dust accumulation nor is the unit installed on an uneven surface.

Malfunctioning Compressor

A compressor is one of the most important parts of a refrigerator. It is solely responsible for keeping the food items cool and if it is faulty, the refrigerator will simply stop cooling. Although compressors are designed to outlast many other components but at times they can break down much sooner as well. Therefore, make sure to clean the compressor as grease, dirt, and debris can keep it from working.

Check The Drain Lines & Evaporator Fans

Next, you need to inspect the drain lines & evaporator fans. If the drain lines are blocked, the unit will start creating and collecting ice. Once that is done, you need to check the evaporator fans. If you observe that there is ice on the evaporator fans, remove it by turning the unit off first. Furthermore, the evaporator coils need to be clean as well. While you are at that, check the drainage lines as well. If the drainage lines are blocked, the unit will not be able to release excess water. This will ultimately reduce the performance of the freezer.

Maintaining The Freezer

If any of the above possible fixes are not successful, then you will need to call a professional for help. However, do perform regular inspections and maintenance to prevent your freezer from malfunctioning otherwise. Maintaining a freezer is not a tough job. Simply make a schedule and follow it once in two months if required.

Final Word

If your refrigerator needs repair, do check your warranty. If it is still in warranty, the manufacturer will perform commercial refrigerators repairs Fairfax without any costs involved. Furthermore, consult the user’s manual as well to check the maintenance plans. This will allow the unit to last to its potential.